6440A REV A Norge Washer Parts List

Search the entire 6440A REV A by part description. Keep descriptions simple, e.g. "belt" or "pump". Need help?

Clutch assembly (clutch (complete))

The clutch assembly is used on direct drive washing machines and helps spin the basket during the spin cycle to remove water from the tub. If your clutch is worn out it can cause the washer to be noisy or leave water in the tub because it won’t drain properly, which will leave your clothes soaked. The clutch assembly includes a brake cam driver, retaining ring, bearing, and a spring, depending on your model number. This is a genuine OEM part. Please remember to disconnect the power and the water supply to the washer before starting your repair.

Easy Part #:: EAP334641

Availability:: In Stock

Price:: $34.27

Direct drive water pump (pump-water)

This pump is intended for use with washing machines that do not have belts. This drain pump has two ports for water to pass through: a large one, and a smaller one. This part is used to remove water from the tub during the drain cycle. If your washer is leaking, not draining, pumps but will not spin or fills and drains at the same time you may need to replace the pump. The pump is located on the motor and is attached by two clips. This part is white in color, made from plastic and is a genuine OEM part. Please remember to shut off the water supply and disconnect the power to the washer before starting your repair.

Easy Part #:: EAP11741239

Availability:: In Stock

Price:: $56.01

Terminal block kit (use 5303935058)

This surface burner terminal block kit comes with interchangeable mounting brackets, ceramic wire nuts, heat shrink protective tubing and wires. This part is used to connect the wire harness to the surface burner element. If your element will not heat at all, or is not heating properly, it is likely an issue with the terminal block and will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power supply before starting your repair.

Easy Part #:: EAP470125

Availability:: In Stock

Price:: $14.70

Crisper drawer (pan, crisper)

The crisper drawer is used for storing fruits and vegetables at a humidity level that will help them stay fresh longer. If the crisper drawer is damaged, you may need to replace it. This crisper drawer is made of clear plastic and measures 12.847" depth by 15.217" width by 6.93 height. This part is sold individually and does not come with the plastic faceplate on it. If your current crisper drawer has one, you will need to remove it and transfer it to the new crisper drawer. NOTE: As per the manufacturer, the crisper drawer has been updated from the original. A new crisper cover may need to be purchased for the drawer to work.

Easy Part #:: EAP11743502

Availability:: In Stock

Price:: $118.82

Suspension spring

This suspension spring is used to support and balance the outer tub of your washer. If the spring is broken it will cause the washer to be off balance and noisy. Check your model to see how many springs are required for your model. The spring is sold individually.

Easy Part #:: EAP11743345

Availability:: In Stock

Price:: $9.19

Center rail (rail, center crisper)

This is the center support rail for the refrigerator crisper drawer. This rail supports center of the crisper frame.

Easy Part #:: EAP11752912

Availability:: In Stock

Price:: $31.60

Infinite switch (switch, infinite (right front)

This switch controls the stove top surface burner.

Easy Part #:: EAP11747215

Availability:: In Stock

Price:: $90.61

Replacement ice maker (sub d7824706q)

This is a replacement ice maker assembly. The ice maker receives water from the water inlet valve and will freeze until ice cubes are formed. Once the water has been frozen the cubes will be ejected from the mold in to the ice bucket. The ice maker will continue the process until the ice bucket has reached the limit. If your ice maker is not making ice you may need to replace this part. Disconnect the power and water supply before starting your repair. This ice maker is a genuine OEM part. NOTE: This part has been updated by the manufacturer and does not include the cover, ice level arm or the wire harness. You can reuse those from the original ice maker.

Easy Part #:: EAP2121513

Availability:: In Stock

Price:: $159.83

Dishwasher door gasket with strike - black (dishwasher door seal and strike kit)

This one-piece door gasket provides a water tight seal between the tub and the door, to keep water from leaking out of your dishwasher. If your dishwasher is leaking, tears, or there are gaps in your gasket, you may need to replace the door gasket. This black door gasket is made of rubber, includes a new latch strike plate for the door latch, and is a genuine OEM part.

Easy Part #:: EAP5136129

Availability:: In Stock

Price:: $87.78

Refrigerator door shelf bin - white (door bin (sold individually, 3 recommended))

This door bin is sold individually. Its dimensions are 18 inches wide, 4.5 inches high, by 7 inches deep.

Easy Part #:: EAP11739091

Availability:: In Stock

Price:: $43.32

Refrigerator ice maker assembly

Easy Part #:: EAP11765620

Availability:: In Stock

Price:: $132.37

Dishwasher heating element

The heating element is not designed to heat the water that enters it, but is designed to maintain the heat of the water that enters the dishwasher. It is located on the bottom of the dishwasher.

Easy Part #:: EAP9494999

Availability:: In Stock

Price:: $100.73

Crisper drawer - clear (pan, crisper)

Sold individually. This crisper drawer is for refrigerators. Crisper drawer stores fruits and vegetables at a humidity level that helps keep them fresh longer.

Easy Part #:: EAP11726308

Availability:: In Stock

Price:: $118.20

Refrigerator crisper pan (crisper pan)

Easy Part #:: EAP11739120

Availability:: In Stock

Price:: $128.54

Bake element

This genuine OEM bake element has push-on terminal ends and provides heat while baking. If the bake element has arcing, is shorted out, the oven is not heating evenly, or little or no heat when baking, you may need to replace it. When replacing the bake element please make sure you disconnect the power to the range. Make sure you don’t let the wires fall back through the rear of the oven. This element has been updated by the manufacturer. New installation screws are required and are sold separately.